The Intersil ISL8723 and ISL8724 are 4 channel sequencers
controlling the on and off sequence of voltages with under
voltage supply fault protection and a “sequence completed”
signal (RESET#). For larger systems, more than 4 voltages
can be sequenced by a simple connection of multiple IC's.
These sequencers use an integrated charge pump to drive 4
external low-cost N-channel MOSFET switch gates above
the IC bias voltage by 5.3V. These IC's can be biased from
and control any supply from 2.5V to 5V and additionally
monitor any voltage above 0.7V. Individual product
descriptions are below.
The four channel ISL8723 (ENABLE input), ISL8724
(ENABLE# input) offer the designer 4 voltage control when it
is required that all four rails are in minimal compliance prior
to turn on and that compliance must be maintained during
operation. The ISL8723 has a low power standby mode
when it is disabled suitable for battery powered applications.