文章提出了以DS80C400 為核心處理器將多路CAN 網絡與多路以太網互連的嵌入式智能網橋?qū)崿F(xiàn)方案。給出了 DS80C400 MII 與外部物理設備之間的連接，詳細闡述JAVAKIT 在WINDOWS 開發平臺下的配置方法，系統規劃了TINI OS 下系統軟件的開發框架與程序編制方法。利用DS80C400 微控制器開發嵌入式系統，可以方便地開發網絡應用系統，大大提高開發效率。
關鍵詞：CAN ，以太網， DS80C400 ，嵌入式智能網橋
Application of DS80C400 in the embedded intelligent network-bridge Li huiping1 Hanjin1,2 Xueqingjun1 (1. Information Science College, SUST, Qingdao, Shandong 266510, China;. 2.School of Mechanical & Electronic Engineering and Automation, Shanghai University, Shanghai 200072, China;) Abstract: The plan of embedded intelligent network-bridge which takes DS80C400 as the core processor connect the multi channel CAN network to the multi channel Ethernet is proposed in the article. The connection between DS80C400 MII and exterior physical equipment is given; the configuration method of JAVAKIT under the platform in WINDOWS is elaborated. The exploitation frame and the programming method based on TINI OS are planned. Developing embedded system with the DS80C400 micro controller may conveniently develop the network application system, greatly enhances the development efficiency.
Key word: CAN,ETHERNET, DS80C400，Embedded intelligent network-bridge