寶鋼現場某空壓機組噪聲突然增大,在對設備進行了精密診斷和連續跟蹤之后,提出故障所在,要求盡快停機處理,避免了設備的繼續劣化及惡性事故的發生。文章探討了渦流傳感器對斷齒故障不敏感的原因,建議齒輪故障可采用加速度傳感器和電流監測的方法,提高
監測效果。
關鍵詞:齒輪裝置;嚙合頻率;狀態監測;故障診斷
Abstract :The noise , emitted by some set of the air2compressors at Baosteel ,once suddenly and severely loudened last year.By continuous surveillance and diagnosis ,we indicated the fault ,and asked for halt to prevent the device from continuous worsening and disaster and to make a check. This article makes a thorough discussion about why the responses of the on2line sensors were normal when the tooth broke , and suggests that the accelerometers and current surveillance can be used for the diagnosis of gear faults to improve the monitoring effect .
Key Words :Gear device ;Engage frequency ;Surveillance ;Fault diagnosis