When creating instrument connec-
tions in any automated test system,
several common issues are likely to
arise. While it’s relatively easy to
connect and verify LXI instruments,
a few extra steps may be necessary
before you can begin programming
the instruments. For example, issues
such as address conflicts are a
common occurrence when setting up
addresses for each device.
1
?
Once an automated test system is
deployed, any type of troubleshoot-
ing, maintenance or repair requires
well-defined procedures that ensure
a stable system configuration and
predictable testing. One common
example: If an instrument is swapped
with another of the same type, the
absence of a well-documented
procedure may leave the system in
a state that causes it to operate in
unexpected or unwanted ways. In the
worst-case scenario, improper opera-
tion may result in damage to either
the test equipment or the device
under test (DUT).