單片機
The PCA9539; PCA9539R is a 24-pin CMOS device that provides 16 bits of GeneralPurpose parallel Input/Output (GPIO) expansion with interrupt and reset forI2C-bus/SMBus applications and was developed to enhance the NXP Semiconduct
The PCA9540B is a 1-of-2 bidirectional translating multiplexer, controlled via the I2C-bus.The SCL/SDA upstream pair fans out to two SCx/SDx downstream pairs, or channels.Only one SCx/SDx channel is selected at a time, determined b
The PCA9541 is a 2-to-1 I2C-bus master selector designed for high reliability dual masterI2C-bus applications where system operation is required, even when one master fails orthe controller card is removed for maintenance. The t
The PCA9542A is a 1-of-2 bidirectional translating multiplexer, controlled via the I2C-bus.The SCL/SDA upstream pair fans out to two SCx/SDx downstream pairs, or channels.Only one SCx/SDx channel is selected at a time, determine
PCA9544中文資料
895PCA9544 是NXP 公司生產的I2C 總線擴展器件,通過它可以將1 路I2C 總線擴展為4路。在對內部控制寄存器進行相應配置后,可選擇4 路下行I2C 總線中的任1 路與上行I2C總線連接。具
The PCA9544A provides 4 interrupt inputs, one for each channeland one open drain interrupt output. When an interrupt is generated byany device, it will be detected by the PCA9544A and the interruptoutput will be driven LOW. The
PCA9544A 是NXP 公司生產的I2C 總線多路復用器,通過該器件可以將一路I2C 總線擴展為4 路I2C 總線。將1 路上行SDA/SCL 通道擴展為4 路下行通道。通過對內部可編程寄存器進行配置
PCA9545A/45B/45C 是一款I(lǐng)2C 總線擴展器件,通過它可以將一路I2C 總線擴展為四路,在對內部控制寄存器進行相應配置后,可同時選擇一路或者多路下行I2C 總線與上行I2C 總線相連。
The PCA9546A is a quad bidirectional translating switch controlled via the I2C-bus. TheSCL/SDA upstream pair fans out to four downstream pairs, or channels. Any individualSCx/SDx channel or combination of channels can be selected,
PCA9546A 是一款I(lǐng)2C 多路復用器和開關,能實現I2C 總線擴展、電平轉換及總線功能恢復
資料
- 資料
- IC元器件
相關推薦
換一換- 基于單片機的額溫槍設計
- MCU模塊原理圖資料
- 小華HC32L低功耗額溫槍開源方案
- 奮斗 STM32 開發板入門手冊
- 【開源】60余套STM32單片機、嵌入式Linux、物聯網、人工智能項目
- LAT1171+STM32F745 USART1 Bootloader 失敗原因分析與解決
- LAT1173高精度定時器的同步功能應用筆記
- LAT1178+關閉 SPI 會導致 WRPERR 錯誤的問題分析應用筆記
- LAT1180+STM32L4R9 的 QuadSPI Flash 通訊速率不理想應用筆記
- LAT1183+高精度定時器中 single-shot 計數模式不工作應用筆記
- LAT1185+一個地址未對齊引起的 HardFault 異常應用筆記
- LAT1187+在 Keil 中使用 STM32CubeProgrammer應用筆記
- LAT1189+Timer 結合 DMA 2D 通道實現不同波形輸出應用筆記
- LAT1198+通過 KEIL 制作 QSPI 接口的外部 Flash 下載算法應用筆記
- LAT1199+TrustZone 架構下使用 LPBAM 導致的 HardFault應用筆記
- LAT1202+TIM DMA burst 輸出變頻 PWM 波形應用筆記
- LAT1204+使用 NANOEDGE.AI 工具完成人體姿態識別應用
- AN5289 使用 STM32WB 系列微控制器構建射頻應用筆記
- LAT1214+使用 BlueNRG-LP SoC 方案無法掃描到擴展廣播包
- LAT1215+如何讓 STM32WB 在沒有 LSE 時運行 BLE 應用程序
- LAT1216 Blue NRG-1/2 系列芯片 Flash 操作與 BLE 事件的互斥處理
- LAT1218 如何選擇和設置外部晶體適配 BlueNRG-X
- LAT1220 關于 BlueNRG-2 在低功耗模式下的端口保持
- BlueNRG-X 如何實現外部天線和 PA 的控制















