資料介紹
Operating from a 1.8V single power supply, the MAX9509/
MAX9510 amplify standard-definition video signals and
only consume 5.8mW quiescent power and 11.7mW
average power. The MAX9509/MAX9510 leverage
Maxim’s DirectDrive? technology to generate a clean,
internal negative supply. Combining the internal negative
power supply with the external positive 1.8V supply,
the MAX9509/MAX9510 are able to drive a 2VP-P
video signal into a 150Ω load.
Besides increasing the output voltage range, Maxim’s
DirectDrive technology eliminates large output-coupling
capacitors and sets the output video black level near
ground. DirectDrive requires an integrated charge pump
and an internal linear regulator to create a clean negative
power supply so that the amplifier can pull the sync
below ground. The charge pump injects little noise into
the video output, making the picture visibly flawless.
The MAX9509/MAX9510 are designed to operate from the
1.8V digital power supply. The high power-supply rejection
ratio (49dB at 100kHz) allows the MAX9509/
MAX9510 to reject the noise from the digital power supply.
The MAX9509 features an internal reconstruction filter
that smoothes the steps and reduces the spikes on the
video signal from the video digital-to-analog converter
(DAC). The reconstruction filter typically has ±1dB
passband flatness of 8.1MHz and 46dB attenuation at
27MHz. The large-signal, ±1dB passband flatness of
the MAX9510 video amplifier is typically 8.4MHz, and
the large signal -3dB frequency is typically 11.4MHz.
The input of the MAX9509/MAX9510 can be directly
connected to the output of a video DAC. The MAX9509/
MAX9510 also feature a transparent input sync-tip
clamp, allowing AC-coupling of input signals with different
DC biases. The MAX9509/MAX9510 have an internal
fixed gain of 8. The input full-scale video signal is
nominally 0.25VP-P, and the output full-scale video signal
is nominally 2VP-P. The devices operate from a 1.8V
or 2.5V single supply and feature a 10nA low-power
shutdown mode. The MAX9509 is offered in an 8-pin
TDFN package and the MAX9510 is offered in an 8-pin
μMAX? package.
MAX9510 amplify standard-definition video signals and
only consume 5.8mW quiescent power and 11.7mW
average power. The MAX9509/MAX9510 leverage
Maxim’s DirectDrive? technology to generate a clean,
internal negative supply. Combining the internal negative
power supply with the external positive 1.8V supply,
the MAX9509/MAX9510 are able to drive a 2VP-P
video signal into a 150Ω load.
Besides increasing the output voltage range, Maxim’s
DirectDrive technology eliminates large output-coupling
capacitors and sets the output video black level near
ground. DirectDrive requires an integrated charge pump
and an internal linear regulator to create a clean negative
power supply so that the amplifier can pull the sync
below ground. The charge pump injects little noise into
the video output, making the picture visibly flawless.
The MAX9509/MAX9510 are designed to operate from the
1.8V digital power supply. The high power-supply rejection
ratio (49dB at 100kHz) allows the MAX9509/
MAX9510 to reject the noise from the digital power supply.
The MAX9509 features an internal reconstruction filter
that smoothes the steps and reduces the spikes on the
video signal from the video digital-to-analog converter
(DAC). The reconstruction filter typically has ±1dB
passband flatness of 8.1MHz and 46dB attenuation at
27MHz. The large-signal, ±1dB passband flatness of
the MAX9510 video amplifier is typically 8.4MHz, and
the large signal -3dB frequency is typically 11.4MHz.
The input of the MAX9509/MAX9510 can be directly
connected to the output of a video DAC. The MAX9509/
MAX9510 also feature a transparent input sync-tip
clamp, allowing AC-coupling of input signals with different
DC biases. The MAX9509/MAX9510 have an internal
fixed gain of 8. The input full-scale video signal is
nominally 0.25VP-P, and the output full-scale video signal
is nominally 2VP-P. The devices operate from a 1.8V
or 2.5V single supply and feature a 10nA low-power
shutdown mode. The MAX9509 is offered in an 8-pin
TDFN package and the MAX9510 is offered in an 8-pin
μMAX? package.
下載該資料的人也在下載
下載該資料的人還在閱讀
更多 >
- MAX6369–MAX6374 datasheet pdf
- MAX6033 datasheet pdf
- MAX1684,MAX1685 datasheet pdf
- MAX1647,MAX1648 datasheet pdf
- MAX1645,MAX1645A datasheet pdf
- MAX481,MAX483,MAX485,MAX487–MAX491 datasheet pdf
- MAX700,MAX701,MAX702 datasheet
- MAX603,MAX604 datasheet pdf
- MAX690, MAX691, MAX692 pdf dat
- MAX130, MAX131 pdf datasheet (
- MAX121 pdf datasheet (308ksps
- MAX9928, MAX9929 pdf datasheet
- MAX3244 pdf datasheet (RS-232
- MAX516 pdf datasheet
- MAX514 pdf datasheet
- MAX4298/MAX4299:適用于嚴苛環境的音頻系統IC 1.3k次閱讀
- 深度解析MAX16128/MAX16129:負載突降與反接電壓保護電路 1.1k次閱讀
- 探索MAX4069 - MAX4072:理想的雙向高端電流檢測放大器 400次閱讀
- 深度解析 MAX6369–MAX6374 引腳可選看門狗定時器 955次閱讀
- MAX13050/MAX13052/MAX13053/MAX13054:工業級高速CAN收發器的卓越之選 92次閱讀
- TCA9509:I2C/SMBus總線中繼器的卓越之選 197次閱讀
- max30100和max30102的區別 8.8k次閱讀
- 配合MAX9217/MAX9218/MAX9247/MAX9248/MAX9250評估板工作 3.8k次閱讀
- max3485與max485區別詳解(解析為什么max3485不能代替max485) 10.7w次閱讀
- MAX232引腳圖功能應用電路 MAX232中文資料PDF數據手冊下載 1.7w次閱讀
- MAX706s_MAX706SESA_MAX706TESA_MAX706PA中文資料PDF英文Datasheet數據手冊 5.7k次閱讀
- MAX14576,MAX14636,MAX14637 USB充電器檢測器 2k次閱讀
- MAX9039–MAX9043,MAX9050–MAX9053低功耗比較器與精密電壓基準源 2.1k次閱讀
- 如何優化MAX16974-MAX16976的電路布局 2.7k次閱讀
- MAX5970應用電路 3.4k次閱讀
下載排行
本周
- 1NB685GQ 26 V,12 A,低靜態電流,大電流 同步降壓變換器數據手冊
- 1.64 MB | 次下載 | 2 積分
- 2PC4160 60V低噪音大電流白光LED驅動器數據手冊
- 1.32 MB | 次下載 | 免費
- 3VSCODE+SDCC?程使?說明
- 0.14 MB | 次下載 | 2 積分
- 4A-68語音處理模組規格書V1
- 1.47 MB | 次下載 | 免費
- 5A-59F_多功能語音處理模組規格書公版
- 2.76 MB | 次下載 | 免費
- 6XT25F08F 四線I0串行NOR閃存數據手冊
- 3.69 MB | 次下載 | 1 積分
本月
- 1ECM96智能電測儀表使用說明書
- 3.41 MB | 7次下載 | 10 積分
- 2矽力杰 Silergy SY7215A 同步升壓調節器 規格書 Datasheet 佰祥電子
- 1.12 MB | 5次下載 | 免費
- 3ECM72智能電測儀表使用說明書
- 2.07 MB | 2次下載 | 10 積分
- 4IP5356H_G3?支持高壓SCP/PD3.0等全協議并集成USB2.0智能監測的移動電源 SOC
- 2.75 MB | 2次下載 | 免費
- 5 斯丹電子 | 磁傳感技術在數據中心市場應用
- 614.56 KB | 2次下載 | 免費
- 6WD1117產品規格書
- 763.67 KB | 2次下載 | 免費
- 7PC4139 32V低噪音大電流白光LED恒流驅動器數據手冊
- 1.57 MB | 2次下載 | 免費
- 8AU6815P 內置 DSP 的 2×32W 立體聲 I2S數字輸入D類功放芯片中文資料
- 1.37 MB | 2次下載 | 免費
總榜
- 1matlab軟件下載入口
- 未知 | 935137次下載 | 10 積分
- 2開源硬件-PMP21529.1-4 開關降壓/升壓雙向直流/直流轉換器 PCB layout 設計
- 1.48MB | 420064次下載 | 10 積分
- 3Altium DXP2002下載入口
- 未知 | 233095次下載 | 10 積分
- 4電路仿真軟件multisim 10.0免費下載
- 340992 | 191469次下載 | 10 積分
- 5十天學會AVR單片機與C語言視頻教程 下載
- 158M | 183360次下載 | 10 積分
- 6labview8.5下載
- 未知 | 81606次下載 | 10 積分
- 7Keil工具M(jìn)DK-Arm免費下載
- 0.02 MB | 73832次下載 | 10 積分
- 8LabVIEW 8.6下載
- 未知 | 65991次下載 | 10 積分
電子發燒友App





創作
發文章
發帖
提問
發資料
發視頻
上傳資料賺積分
評論