機組動靜部件碰摩是運行中常見的重要故障,它對正常運轉有直接影響。現場碰摩的診斷難度較高,不及時、不準確的診斷都會造成經濟損失。結合某電廠一臺300MW機組低壓通流部分發生碰摩時實際的振動數據,介紹了碰摩發生時傳感器間隙電壓、轉軸靜態軌跡以及相位表現出的征兆和特征,并介紹了現場緊急處理這種故障的方法。
關鍵詞:旋轉機械;碰摩;故障診斷
Abstract :The rubbing , which has a bad effect on turbo generators , is frequently found in power plants and complicated in diagno2 sis. An untimely and imprecise diagnosis will cause a large lost. From vibration statistics of a 300MW unit , the article introduced the gap plot , the shaft average centerline plot , the shaft moving centerline plot , and the phase analysis , all of which are important in the diagnosis of this fault. It also put forward a general method in coping with this kind of fault.
Key words :rotating machinery; rubbing; fault diagnosis