前言

這一篇就到了圖像估計光照度算法章節，這篇我主要記錄如何使用 tensorflow2 訓練一個從圖片中估計光照度的算法。一般的流程是拍攝多張圖片以及用光照度計來檢測其光照度值，分別作為輸入和輸出。但是在本章呢，為了起到演示的作用，數據集我會使用 [MIT-Adobe FiveK Dataset] 。光照度值呢，我使用圖片的 rgb 數值經過算法r0.2126+g0.7152+b*0.0722計算亮度。這樣就有了一定數量的數據集。也就有基礎進行后續的訓練和測試了。下面準備進入正文。

數據獲取

因?yàn)?MIT-Adobe FiveK Dataset 數據集包含了 5000 張?jiān)?dng 圖像和 5 和專家A,B,C,D,E進行處理之后的 tiff 圖像(一般地，這個數據集是用來訓練圖像增強相關的模型的，我這里就用來訓練光照度估計算法了，嘿嘿)。因?yàn)橥暾臄?shù)據壓縮包太大了~50GB。受限電腦的容量和速度，我選擇了使用腳本逐個下載這些圖片（因?yàn)檫@些圖片的下載路徑有規律，再加上這些圖片的名字在官網可以下載下來，所以腳本就讀取包含圖片名字的文件，然后逐個拼接下載路徑，使用 curl 工具完成下載）。這里，我選擇了下載原始 dng 圖片和專家 C 的 tiff 圖片。
下載 dng 原始文件的腳本是：

#!/usr/bin/bash

#改變當前工作路徑
CURRENT_PATH="/home/red/Downloads/fivek_dataset/expertc"
#本文件所在路徑
cd ${CURRENT_PATH}
#改變當前路徑

#存儲圖像名稱的list
img_lst=[]
#讀取圖片名列表
files_name=`cat filesAdobe.txt`
files_mit_name=`cat filesAdobeMIT.txt`

j=0
for i in ${files_name};do
    # https://data.csail.mit.edu/graphics/fivek/img/dng/a0001-jmac_DSC1459.dng
    URL='https://data.csail.mit.edu/graphics/fivek/img/dng/'${i}'.dng'
    file_cur=${URL##*/}
    echo "Downloading ${URL}@${j}"
    j=$((j+1))
    if [ -f ${file_cur} ];then
        echo "${file_cur} exist"
    else
        # echo "${file_cur} no exist, it's you"
        # break
        curl -O ${URL}
    fi
done

下載專家 C 處理后的文件腳本是：

#!/usr/bin/bash

#改變當前工作路徑
CURRENT_PATH="/home/red/Downloads/fivek_dataset/expertc"
#本文件所在路徑
cd ${CURRENT_PATH}
#改變當前路徑

#存儲圖像名稱的list
img_lst=[]
#讀取圖片名列表
files_name=`cat filesAdobe.txt`
files_mit_name=`cat filesAdobeMIT.txt`

j=0
for i in ${files_name};do
    #下載由 expert C 所調整的圖像(可根據需要下載其它的四類圖像)
    URL='https://data.csail.mit.edu/graphics/fivek/img/tiff16_c/'${i}'.tif'
    file_cur=${URL##*/}
    echo "Downloading ${URL}@${j}"
    j=$((j+1))
    if [ -f ${file_cur} ];then
        echo "${file_cur} exist"
    else
        echo "${file_cur} no exist, it's you"
        # break
        curl -O ${URL}
    fi
done

經過了好幾天斷斷續續的下載，最后我一共得到了 1000 張左右圖片。有了圖片之后，下一步就是計算光照度了，這里使用 python 腳本和 pillow 包完成，為了后續移植到 AI300G 上，我將圖片縮放到了統一的 255*255。并且將計算的光照度和圖像的名稱存儲到一個 csv 文件。這部分腳本如下：

#!/bin/env python3

import sys
import csv
import os
import re

from PIL import Image

gs_illumiance_csv_file_fd=0
gs_illumiance_csv_file_name='illumiance_estimate.csv'
gs_illumiance_data_list=[['Name', 'Illuminance']]
DEST_DIR_NAME=r'PNG255'

def illuname_estimate(t):
    r,g,b=t
    return r*0.2126+g*0.7152+b*0.0722


def get_pic_pixels(pic_name):
    with Image.open(pic_name) as pic:
        ans=0
        pic=pic.resize((255,255))
        print(f'raw name:{pic_name}')
        match=re.match(r'w+/(S+).w+', pic_name)
        if match:
            basename=match.group(1)
            basename=DEST_DIR_NAME+'/'+basename+'.png'
            print(f'new name:{basename}')
            pic.save(basename)
            #  pic.show()
        width, heigh = pic.size
        for x in range(width):
            for y in range(heigh):
                r, g, b = pic.getpixel((x, y))
                ans=ans+illuname_estimate((r,g,b))

    # 光照度取整
    ans=round(ans)
    print(f'{pic_name}: illuname ans:{ans}')
    return ans

def insert_item(pic_name, illumiance_estimate):
    global gs_illumiance_csv_file_fd
    global gs_illumiance_csv_file_name
    global gs_illumiance_data_list
    item_template=['NONE', -1]
    item_template[0]=pic_name
    item_template[1]=illumiance_estimate
    gs_illumiance_data_list.append(item_template)

def do_with_dir(dir_name):
    for filename in os.listdir(dir_name):
        filepath=os.path.join(dir_name, filename)
        if (os.path.isfile(filepath)):
            print("do input %s" %(filepath))
            ans=get_pic_pixels(filepath)
            insert_item(filename, ans)
            #  return

if len(sys.argv) > 1:
    print("do input dir:%s" %(sys.argv[1]))
    if not os.path.exists(DEST_DIR_NAME):
        os.makedirs(DEST_DIR_NAME)
    do_with_dir(sys.argv[1])
    gs_illumiance_csv_file_fd=open(gs_illumiance_csv_file_name, 'w', newline='')
    csv.writer(gs_illumiance_csv_file_fd).writerows(gs_illumiance_data_list)
else:
    print("Please input pic name")

這樣就得到了類似下面的數據集：

? head illumiance_estimate.csv
Name,Illuminance
a0351-MB_070908_006_dng.jpeg,3680630
a0100-AlexWed07-9691_dng.jpeg,1258657
a0147-kme_333.jpeg,5168820
a0261-_DSC2228_dng.jpeg,2571498
a0255-_DSC1448.jpeg,8747593
a0054-kme_097.jpeg,5351908
a0393-_DSC0040.jpeg,1783394
a0304-dgw_137_dng.jpeg,3118835
a0437-jmacDSC_0011.jpeg,6140107

至此有了一定數量的數據集（這里我使用了667張照片），接下來就是模型訓練了。

模型訓練

模型訓練的基本思想就是，首先將數據集按比例(4:1)拆分為訓練集和測試集，然后使用 tensorflow 建立模型訓練參數進行檢驗。
大概流程是：

1. 首先是根據 csv 文件建立 tensorflow dataset 格式的數據集；
2. 建立模型使用數據集進行模型訓練和測試

這部分代碼為：

#!/usr/bin/python3.11

TF_ENABLE_ONEDNN_OPTS=0

import numpy as np
import os
import PIL
import PIL.Image
import tensorflow as tf
import pathlib
import csv
import pandas as pd
import tensorflow.data
import sys
import matplotlib.pyplot as plt

AUTOTUNE=tensorflow.data.AUTOTUNE
BATCH_SIZE=32
IMG_WIDTH=255
IMG_HEIGHT=255
ILLUMINACE_FILE=r'illumiance_estimate.csv'
print(tf.__version__)

import tensorflow as tf
import pandas as pd

image_count = len(os.listdir(r'JP'))
print(f'whole img count={image_count}')
# 假設CSV文件有兩列：'image_path' 和 'label'
df = pd.read_csv(ILLUMINACE_FILE)

# 將DataFrame轉換為T(mén)ensorFlow可以處理的格式
image_paths = df['Name'].values
labels = df['Illuminance'].values
labels = labels.astype(np.float32)
labels /= 16777215.0

# 創建一個Dataset
gs_dataset = tf.data.Dataset.from_tensor_slices((image_paths, labels))

print(type(gs_dataset))
print(gs_dataset)
print(r'-------------------------------------------')
# 定義一個函數來加載和預處理圖像
def load_and_preprocess_image(image_path, label):
    print(image_path)
    image_path='JP/'+image_path
    image = tf.io.read_file(image_path)
    image = tf.image.decode_jpeg(image, channels=3)
    image = tf.image.resize(image, [IMG_WIDTH, IMG_HEIGHT])
    #  image /= 255.0  # 歸一化
    return image, label

# 應用這個函數到Dataset上
gs_dataset = gs_dataset.map(load_and_preprocess_image)
# 打亂數據
gs_dataset = gs_dataset.shuffle(image_count, reshuffle_each_iteration=False)

val_size = int(image_count * 0.2)

gs_train_ds = gs_dataset.skip(val_size)
gs_val_ds = gs_dataset.take(val_size)

def configure_for_performance(ds):
    ds = ds.cache()
    ds = ds.shuffle(buffer_size=1000)
    ds = ds.batch(BATCH_SIZE)
    ds = ds.prefetch(buffer_size=AUTOTUNE)
    return ds

gs_train_ds = configure_for_performance(gs_train_ds)
gs_val_ds = configure_for_performance(gs_val_ds)

image_batch, illuminance_batch = next(iter(gs_train_ds))

#  plt.figure(figsize=(10, 10))

#  for i in range(9):
  #  ax = plt.subplot(3, 3, i + 1)
  #  print(image_batch[i])
  #  #  img_data=image_batch[i].numpy()*255.0
  #  #  plt.imshow(img_data.astype("uint8"))
  #  plt.imshow(image_batch[i].numpy().astype("uint8"))
  #  illuminance = illuminance_batch[i]
  #  plt.title(illuminance.numpy())
  #  plt.axis("off")

#  plt.show()

#  sys.exit()

model = tf.keras.Sequential([
  tf.keras.layers.Rescaling(1./255),
  tf.keras.layers.Conv2D(32, (3,3), activation='relu', input_shape=(IMG_WIDTH, IMG_HEIGHT, 3)),
  tf.keras.layers.MaxPooling2D(2, 2),
  tf.keras.layers.Conv2D(64, (3, 3), activation='relu'),
  tf.keras.layers.MaxPooling2D(2, 2),
  tf.keras.layers.Conv2D(32, 3, activation='relu'),
  tf.keras.layers.MaxPooling2D(),
  tf.keras.layers.Flatten(),
  tf.keras.layers.Dense(128, activation='relu'),
  tf.keras.layers.Dense(1)
])

model.compile(
  optimizer='adam',
  loss='mean_squared_error')

model.fit(
  gs_train_ds,
  validation_data=gs_val_ds,
  epochs=12
)

model.save("illu_v01")

執行上述代碼，可以看到最后的 loss 和 val_loss 為：

? ./train_tf2_v2.py
2024-08-08 13:41:48.341117: I tensorflow/core/util/port.cc:113] oneDNN custom operations are on. You may see slightly different numerical results due to floating-point round-off errors from different computation orders. To turn them off, set the environment variable `TF_ENABLE_ONEDNN_OPTS=0`.
2024-08-08 13:41:48.342596: I external/local_tsl/tsl/cuda/cudart_stub.cc:31] Could not find cuda drivers on your machine, GPU will not be used.
2024-08-08 13:41:48.363696: E external/local_xla/xla/stream_executor/cuda/cuda_dnn.cc:9261] Unable to register cuDNN factory: Attempting to register factory for plugin cuDNN when one has already been registered
2024-08-08 13:41:48.363729: E external/local_xla/xla/stream_executor/cuda/cuda_fft.cc:607] Unable to register cuFFT factory: Attempting to register factory for plugin cuFFT when one has already been registered
2024-08-08 13:41:48.364549: E external/local_xla/xla/stream_executor/cuda/cuda_blas.cc:1515] Unable to register cuBLAS factory: Attempting to register factory for plugin cuBLAS when one has already been registered
2024-08-08 13:41:48.368601: I external/local_tsl/tsl/cuda/cudart_stub.cc:31] Could not find cuda drivers on your machine, GPU will not be used.
2024-08-08 13:41:48.368762: I tensorflow/core/platform/cpu_feature_guard.cc:182] This TensorFlow binary is optimized to use available CPU instructions in performance-critical operations.
To enable the following instructions: AVX2 AVX_VNNI FMA, in other operations, rebuild TensorFlow with the appropriate compiler flags.
2024-08-08 13:41:48.801750: W tensorflow/compiler/tf2tensorrt/utils/py_utils.cc:38] TF-TRT Warning: Could not find TensorRT
2.15.0
whole img count=667
2024-08-08 13:41:51.138713: I external/local_xla/xla/stream_executor/cuda/cuda_executor.cc:901] successful NUMA node read from SysFS had negative value (-1), but there must be at least one NUMA node, so returning NUMA node zero. See more at https://github.com/torvalds/linux/blob/v6.0/Documentation/ABI/testing/sysfs-bus-pci#L344-L355
2024-08-08 13:41:51.139135: W tensorflow/core/common_runtime/gpu/gpu_device.cc:2256] Cannot dlopen some GPU libraries. Please make sure the missing libraries mentioned above are installed properly if you would like to use GPU. Follow the guide at https://www.tensorflow.org/install/gpu for how to download and setup the required libraries for your platform.
Skipping registering GPU devices...
< class 'tensorflow.python.data.ops.from_tensor_slices_op._TensorSliceDataset' >
< _TensorSliceDataset element_spec=(TensorSpec(shape=(), dtype=tf.string, name=None), TensorSpec(shape=(), dtype=tf.float32, name=None)) >
-------------------------------------------
Tensor("args_0:0", shape=(), dtype=string)
Epoch 1/12
17/17 [==============================] - 11s 603ms/step - loss: 98.9302 - val_loss: 0.1012
Epoch 2/12
17/17 [==============================] - 8s 495ms/step - loss: 0.0493 - val_loss: 0.0043
Epoch 3/12
17/17 [==============================] - 8s 481ms/step - loss: 0.0078 - val_loss: 0.0043
Epoch 4/12
17/17 [==============================] - 8s 479ms/step - loss: 0.0025 - val_loss: 0.0040
Epoch 5/12
17/17 [==============================] - 8s 477ms/step - loss: 0.0023 - val_loss: 0.0029
Epoch 6/12
17/17 [==============================] - 8s 480ms/step - loss: 0.0021 - val_loss: 0.0028
Epoch 7/12
17/17 [==============================] - 8s 482ms/step - loss: 0.0020 - val_loss: 0.0028
Epoch 8/12
17/17 [==============================] - 8s 482ms/step - loss: 0.0019 - val_loss: 0.0027
Epoch 9/12
17/17 [==============================] - 8s 482ms/step - loss: 0.0018 - val_loss: 0.0026
Epoch 10/12
17/17 [==============================] - 8s 485ms/step - loss: 0.0017 - val_loss: 0.0026
Epoch 11/12
17/17 [==============================] - 8s 485ms/step - loss: 0.0015 - val_loss: 0.0023
Epoch 12/12
17/17 [==============================] - 8s 484ms/step - loss: 0.0011 - val_loss: 0.0020

并且模型也保存在了 illu_v01 目錄。

? ls illu_v01/
assets  fingerprint.pb  keras_metadata.pb  saved_model.pb  variables

模型測試

現在有可模型，下面就是測試下自己的模型，使用下述 python 代碼在 PC 端進行測試：

#!/usr/bin/python3.11

import numpy as np
import os
import PIL
import PIL.Image
import tensorflow as tf
import pathlib
import csv
import pandas as pd
import tensorflow.data
import sys
import matplotlib.pyplot as plt

IMG_WIDTH=255
IMG_HEIGHT=255

reload_model=tf.keras.models.load_model("illu_v01")
image_path=r'./JP/a0001-jmac_DSC1459.jpeg'
if len(sys.argv) < 2:
    print('Please input some pic to predict')
    sys.exit()
else:
    image_path=sys.argv[1]


image = tf.io.read_file(image_path)
image = tf.image.decode_jpeg(image, channels=3)
image = tf.image.resize(image, [IMG_WIDTH, IMG_HEIGHT])
image = tf.reshape(image, [1, IMG_WIDTH, IMG_HEIGHT, 3])

#  sys.exit()

predictions=reload_model.predict(image)
print(f'{image_path} ans={predictions*16777215}')

簡單測試下模型：

check_tf2.py JP/a0001-jmac_DSC1459.jpeg
2024-08-08 13:57:08.263506: I tensorflow/core/util/port.cc:113] oneDNN custom operations are on. You may see slightly different numerical results due to floating-point round-off errors from different computation orders. To turn them off, set the environment variable `TF_ENABLE_ONEDNN_OPTS=0`.
2024-08-08 13:57:08.264895: I external/local_tsl/tsl/cuda/cudart_stub.cc:31] Could not find cuda drivers on your machine, GPU will not be used.
2024-08-08 13:57:08.285614: E external/local_xla/xla/stream_executor/cuda/cuda_dnn.cc:9261] Unable to register cuDNN factory: Attempting to register factory for plugin cuDNN when one has already been registered
2024-08-08 13:57:08.285646: E external/local_xla/xla/stream_executor/cuda/cuda_fft.cc:607] Unable to register cuFFT factory: Attempting to register factory for plugin cuFFT when one has already been registered
2024-08-08 13:57:08.286510: E external/local_xla/xla/stream_executor/cuda/cuda_blas.cc:1515] Unable to register cuBLAS factory: Attempting to register factory for plugin cuBLAS when one has already been registered
2024-08-08 13:57:08.290464: I external/local_tsl/tsl/cuda/cudart_stub.cc:31] Could not find cuda drivers on your machine, GPU will not be used.
2024-08-08 13:57:08.290608: I tensorflow/core/platform/cpu_feature_guard.cc:182] This TensorFlow binary is optimized to use available CPU instructions in performance-critical operations.
To enable the following instructions: AVX2 AVX_VNNI FMA, in other operations, rebuild TensorFlow with the appropriate compiler flags.
2024-08-08 13:57:08.725843: W tensorflow/compiler/tf2tensorrt/utils/py_utils.cc:38] TF-TRT Warning: Could not find TensorRT
2024-08-08 13:57:11.051710: I external/local_xla/xla/stream_executor/cuda/cuda_executor.cc:901] successful NUMA node read from SysFS had negative value (-1), but there must be at least one NUMA node, so returning NUMA node zero. See more at https://github.com/torvalds/linux/blob/v6.0/Documentation/ABI/testing/sysfs-bus-pci#L344-L355
2024-08-08 13:57:11.051982: W tensorflow/core/common_runtime/gpu/gpu_device.cc:2256] Cannot dlopen some GPU libraries. Please make sure the missing libraries mentioned above are installed properly if you would like to use GPU. Follow the guide at https://www.tensorflow.org/install/gpu for how to download and setup the required libraries for your platform.
Skipping registering GPU devices...
1/1 [==============================] - 0s 57ms/step
JP/a0001-jmac_DSC1459.jpeg ans=[[check_tf2.py JP/a0001-jmac_DSC1459.jpeg
2024-08-08 13:57:08.263506: I tensorflow/core/util/port.cc:113] oneDNN custom operations are on. You may see slightly different numerical results due to floating-point round-off errors from different computation orders. To turn them off, set the environment variable `TF_ENABLE_ONEDNN_OPTS=0`.
2024-08-08 13:57:08.264895: I external/local_tsl/tsl/cuda/cudart_stub.cc:31] Could not find cuda drivers on your machine, GPU will not be used.
2024-08-08 13:57:08.285614: E external/local_xla/xla/stream_executor/cuda/cuda_dnn.cc:9261] Unable to register cuDNN factory: Attempting to register factory for plugin cuDNN when one has already been registered
2024-08-08 13:57:08.285646: E external/local_xla/xla/stream_executor/cuda/cuda_fft.cc:607] Unable to register cuFFT factory: Attempting to register factory for plugin cuFFT when one has already been registered
2024-08-08 13:57:08.286510: E external/local_xla/xla/stream_executor/cuda/cuda_blas.cc:1515] Unable to register cuBLAS factory: Attempting to register factory for plugin cuBLAS when one has already been registered
2024-08-08 13:57:08.290464: I external/local_tsl/tsl/cuda/cudart_stub.cc:31] Could not find cuda drivers on your machine, GPU will not be used.
2024-08-08 13:57:08.290608: I tensorflow/core/platform/cpu_feature_guard.cc:182] This TensorFlow binary is optimized to use available CPU instructions in performance-critical operations.
To enable the following instructions: AVX2 AVX_VNNI FMA, in other operations, rebuild TensorFlow with the appropriate compiler flags.
2024-08-08 13:57:08.725843: W tensorflow/compiler/tf2tensorrt/utils/py_utils.cc:38] TF-TRT Warning: Could not find TensorRT
2024-08-08 13:57:11.051710: I external/local_xla/xla/stream_executor/cuda/cuda_executor.cc:901] successful NUMA node read from SysFS had negative value (-1), but there must be at least one NUMA node, so returning NUMA node zero. See more at https://github.com/torvalds/linux/blob/v6.0/Documentation/ABI/testing/sysfs-bus-pci#L344-L355
2024-08-08 13:57:11.051982: W tensorflow/core/common_runtime/gpu/gpu_device.cc:2256] Cannot dlopen some GPU libraries. Please make sure the missing libraries mentioned above are installed properly if you would like to use GPU. Follow the guide at https://www.tensorflow.org/install/gpu for how to download and setup the required libraries for your platform.
Skipping registering GPU devices...
1/1 [==============================] - 0s 57ms/step
JP/a0001-jmac_DSC1459.jpeg ans=[[5459503.]].]]

發現估計的光照度值是 5459503 和實際的 5363799 對比一下還是有15%左右的誤差。但是目前為止，整個模型訓練測試流程已經完成，下一步在是PC端模擬拉流使用模型對圖像進行實時計算了，期待哦。

審核編輯 黃宇